Lamco logo
Back to products page

SYNTHETIC WEB SLINGS

flat eye slingClick for more information (.pdf)

Type 3 - Flat Eye: These slings have flat eyes at each end and conform to all basic rigging hitches. The flat eye aids in sliding the sling in and out of narrow places. The eyes may be buffered on the inside for longer life.
Capacity Range - 1,100 lbs. to 132,000 lbs.
Width Range - 1" to 12"


half eye twist slingClick for more information (.pdf) Type 4 - Half Twist Eye: These slings have eyes with a half twist to keep them open. The open eye makes for faster hitching in a choker and allows the operator to quickly slip the other eye onto the crane hook.
Capacity Range - 1,100 lbs. to 132,000 lbs.
Width Range - 1" to 12"


endless slingClick for more information (.pdf) Type 5 - Endless: These slings give the advantage of longer life because the "wear point" revolves around the sling as it is repeatedly used. Endless slings with a width of three inches or more can be tapered at bearing points to fit on crane hooks.
Capacity Range - 2,200 lbs. to 103,200 lbs.
Width Range - 1" to 6"


Click for more information (.pdf) Type 6 - Reversible Eye: These slings are built for rugged use. Both sides of the body are protected with abrasion resistant nylon to give longer life in rough applications. The eyes can be turned inside-out to give a new wear surface.
Capacity Range - 3,200 lbs. to 68,000 lbs.
Width Range - 2" to 6"


flat eye slingClick for more information (.pdf) Type 7 - Flat Eye: These slings are built for the same rugged use as Type 6 slings. Type 7 slings have flat eyes to slide under loads or for tight clearance areas.
Capacity Range - 3,200 lbs. to 68,000 lbs.
Width Range - 2" to 6"


slings with hardwareClick for more information (.pdf) Type 1 - Slings with Hardware: These slings have alloy oblong master links on each end. The oblongs offer a greater capacity at a less expensive price than steel triangles. The hardware may be reused after the webbing has worn out.
Capacity Range - 1,100 lbs. to 33,000 lbs.
Width Range - 1" to 6"


slings with hardwareClick for more information (.pdf) Type 1 - Slings with Hardware: These slings have one triangle and one choker end and can be supplied in either aluminum or steel. Aluminum is lighter in weight but has lower capacities. The hardware may be reused after the webbing has worn out.
Capacity Range - 2,200 lbs. to 64,000 lbs.
Width Range - 2" to 12"


slings with hardwareClick for more information (.pdf) Type 2 - Slings with Hardware: These slings have two triangle ends and can be supplied in either aluminum or steel. These slings can only be used in a vertical or basket hitch.
Capacity Range - 2,200 lbs. to 64,000 lbs.
Width Range - 2" to 12"


bridle eye slingClick for more information (.pdf) Bridle Eye : These slings are light duty with wide bodies to handle bulky loads and narrow eyes to fit small crane hooks. These slings can only be used in a basket hitch.
Capacity Range - 8,000 lbs. to 10,000 lbs.
Width Range - 6" to 24"


wide body slingClick for more information (.pdf) Wide Body : These slings are also designed for use in a basket hitch only. These slings are used primarily in pairs from a spreader beam for heavy loads or picking large coils around their circumference.
Capacity Range - 13,200 lbs. to 92,000 lbs.
Width Range - 6" to 24"


single and double leg slingsClick for more information (.pdf) BRIDLE AND MULTI-LEG WEB SLINGS
Advantages:

   • Lightweight and easy to handle
   • Do not conduct electricity
   • Help absorb shock
   • Fitting options include, but are not limited to:
     Rings, hooks, shackles and choker hardware
   • Available in 3 & 4 leg assemblies also
   • Can be made from either nylon or polyester webbing
Contact us for your specific needs!


WEAR PADS AND SLEEVES

Webbing wear pads and sleeves offer extra protection to a web sling at a point where it wears the most. They can be used on any style of web sling and can be ordered in any length. Wear pads can be sewn anywhere on the sling, on one or both sides. Sleeves cover both sides of the sling and do not stretch with the sling when the lift is being made.
wear pads and sleevesClick for more information (.pdf)


home | products | services | contact us

For Ergonomically Designed Overhead Lifting Solutions
LAMCO Slings & Rigging, Inc. • 4960 - 41st Street Court • Moline, IL 61265
1-800-447-1885 • Local: 309-764-7400 • Fax: 309-764-1105 • e-mail